What to Do if Your Window Tint Starts to Peel

The cost of replacing your window tint will depend on several factors, including the type of film used, the size of the windows, and whether you opt for professional installation. While this can be more expensive than a simple repair, a fresh tint job will provide a longer-lasting solution and improve the overall appearance and functionality of your vehicle or home.

4. Decide Whether to Replace the Tint
In some cases, repairing the peeling tint may not be worthwhile, especially if the damage is extensive or if the film is aging and deteriorating. In such cases, replacing the tint entirely may be the best option. This will not only restore the appearance of your windows but also improve their functionality, such as UV protection and heat reduction.

Conclusion
Peeling window tinting can be a frustrating issue, but it’s not the end of the world. Whether caused by improper installation, excessive sun exposure, or natural wear and tear, there are several solutions to fix the problem. From DIY repairs to professional assistance, taking the right steps will help restore the functionality and appearance of your windows. To avoid future peeling, it’s important to invest in high-quality tint, properly care for your windows, and minimize sun damage. With the right approach, you can enjoy the benefits of window tinting without dealing with the hassle of peeling. For expert help, contact Southern Tint in Chalmette, LA at (504) 414-8250 or via email at info@southerntint.com.

Clean the Surface: Start by cleaning the area around the peeling film. Use a soft cloth and a mild soap solution or glass cleaner to remove any dirt, oils, or other debris. Be gentle during this process to avoid causing additional damage.
Reattach the Tint: If the film has started to peel but is still largely intact, you can use a heat gun or hairdryer to warm the edges of the tint. This will make the adhesive more pliable. Gently press the film back into place, ensuring it adheres firmly to the glass.
Apply Adhesive: If the adhesive has failed completely, you can try using a special window tint adhesive that is safe for use on tint films. Carefully apply a small amount to the area where the film has lifted, then press the film back into place. Make sure to smooth out any bubbles or wrinkles as you go along.
Trim Excess Tint: window tinting If the edges of the film have frayed or become damaged, carefully trim the excess tint using a razor blade or utility knife. Be sure to cut precisely to avoid damaging the underlying glass or leaving jagged edges.
Cure the Tint: After repositioning the film, allow the adhesive to cure for 24 to 48 hours. During this time, avoid rolling down the window or applying pressure to the film to ensure it fully adheres.
3. Consider a Professional Repair
If your window tinting is more severely damaged or if you aren’t comfortable attempting a DIY repair, it’s best to call in a professional. Tinting experts have the necessary experience, tools, and products to repair or replace your tint effectively.

Poor Installation: One of the primary causes of peeling is improper installation. If the film was not applied correctly, it may begin to lift at the edges or corners. If the surface wasn’t thoroughly cleaned before application or the tint was not applied with the proper adhesive, peeling can occur much sooner than expected.
Sun Exposure: The sun’s ultraviolet (UV) rays can break down the adhesive used to hold window tint in place. Over time, these rays can cause the film to degrade, leading to peeling, bubbling, or discoloration. If your windows are exposed to direct sunlight for prolonged periods, the tint may begin to lose its adhesion and peel off.
Heat: Intense heat from the sun or an overly heated interior can cause the film to expand and contract, weakening the adhesive bonds. This can cause the tint to lift or peel off entirely.
Quality of Film: Not all tint films are made the same. Lower-quality tints may have a thinner protective coating or inferior adhesives that are more prone to damage and peeling. Investing in high-quality, durable window tinting film can prevent these issues from arising prematurely.
Scraping or Cleaning Issues: Harsh cleaning methods or scraping the window to remove dirt, debris, or ice can damage the tint film, leading to peeling. Using abrasive cloths or sharp objects on tinted windows can cause scratches or damage to the tint’s surface.
How to Handle Peeling Window Tint
Once you notice peeling window tint, there are a few steps you can take to either fix the issue or prevent it from worsening. Let’s explore the best ways to address this common problem.

1. Assess the Extent of the Damage
Before jumping into any repairs, it’s crucial to assess the extent of the damage. If only a small section of the tint is peeling or lifting, you may be able to fix it yourself. However, if the peeling is widespread or the film is bubbling or discolored, it may require professional attention. Carefully inspect the film for other signs of damage, such as discoloration, fading, or cracks, as these can help determine the best course of action.