10 Things We Do Not Like About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to fix the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap is large, you may be interested in the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues that include sagging. A window repairs near me that is sagging can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your upvc window repair windows are sagging.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window repairs and check for fitting. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle wears out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if get up each morning to find mouldy walls and floors that are wet. The leaks of water from windows do can not only cause destruction of your home's structure but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on how severe the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double glazed window repairs-glazed window, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze, it may be hinges at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to change the hinges on a window but it's much easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are more than happy to provide advice.

It is also important to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also become misaligned due to wear, creating a gap where the sash meets frame. If they are damaged beyond repair, it could be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it's possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts are the window seals. They can become worn down or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the possibility of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be put on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will provide a great level of insulation and security for your home. It is crucial to recognise that all windows have a lifespan and they may reach an point at which it is more economical to replace them than repair them. If you have any problems with your upvc window it is recommended to speak with a professional immediately.